K dispozici je mnoho typů polymerových tvarovek, které lze klasifikovat na základě jejich tvaru, materiálu a použití. Zde jsou některé z nejběžnějších typů:
Kompresní armatury: Jedná se o armatury, které používají kompresi ke spojení dvou trubek nebo trubek dohromady. Běžně se používají ve vodovodních a zavlažovacích systémech.
Spojky push to connect: Jedná se o armatury, které používají jednoduchý tlačný mechanismus pro připojení trubek nebo hadic. Často se používají v pneumatických a hydraulických systémech.
Ostnaté armatury: Jedná se o armatury, které mají ostnatý konec, který je vložen do potrubí nebo hadice. Často se používají v nízkotlakých aplikacích, jako jsou akvária a systémy kapkové závlahy.
Rychloupínací armatury: Jedná se o armatury, které používají uzamykací mechanismus k rychlému připojení nebo odpojení potrubí nebo potrubí. Běžně se používají v palivových a hydraulických systémech.
Závitové tvarovky: Jedná se o tvarovky, které mají závity, které umožňují jejich našroubování na trubky nebo tvarovky. Běžně se používají ve vodovodních a plynových systémech.
Rozšířené tvarovky: Jedná se o tvarovky, které mají rozšířený konec, který je vložen do potrubí nebo trubky. Běžně se používají v chladicích a klimatizačních systémech.
Armatury Camlock: Jedná se o armatury, které mají vačkový a drážkový mechanismus, který umožňuje jejich rychlé a snadné připojení nebo odpojení. Běžně se používají v průmyslových aplikacích.
Polymerové tvarovky mohou být vyrobeny z různých materiálů, včetně PVC, PEX, nylonu a polypropylenu. Výběr materiálu bude záviset na aplikaci a specifických požadavcích systému.
Zde jsou některé další typy polymerových tvarovek:
Vložné armatury: Jedná se o armatury, které se vkládají do konce hadice nebo potrubí a zajišťují hadicovou svorkou. Běžně se používají při zavlažování a zahradních aplikacích.
Elbow fittings: These are fittings that allow pipes or tubing to be connected at an angle. They come in different angles, such as 90 degrees or 45 degrees, and are commonly used in plumbing and gas supply systems.
Tee fittings: These are fittings that allow a pipe or tubing to be split into two or more directions. They are commonly used in plumbing and irrigation systems.
Cross fittings: These are fittings that allow pipes or tubing to be split into four directions. They are commonly used in plumbing and irrigation systems.
Union fittings: These are fittings that allow for easy disassembly and reassembly of pipes or tubing. They are commonly used in applications where pipes or tubing may need to be disconnected for maintenance or repair.
Polymer fittings offer many benefits over traditional metal fittings, including lower cost, lighter weight, and resistance to corrosion and chemicals. They are commonly used in a wide range of applications, including plumbing, irrigation, pneumatics, and hydraulics.
Here are a few more types of polymer fittings:
Cam and Groove fittings: These are fittings that have a cam shaped groove and a locking arm that allows for quick and easy connection and disconnection of hoses. They are commonly used in industries such as agriculture, chemical, and food processing.
Ball valves: These are fittings that use a ball with a hole in the middle to control the flow of fluid through a pipe or tubing. They are commonly used in plumbing and irrigation systems.
Check valves: These are fittings that allow fluid to flow in one direction only, preventing backflow. They are commonly used in pumps, water systems, and irrigation systems.
Clamp fittings: These are fittings that use a clamp to secure two pieces of tubing or pipe together. They are commonly used in the pharmaceutical, biotech, and food processing industries.
Swivel fittings: These are fittings that allow pipes or tubing to rotate or pivot while still maintaining a secure connection. They are commonly used in applications where hoses or pipes need to be able to move without disconnecting.
Polymer fittings are often preferred over metal fittings because they are less expensive, lighter weight, and easier to install. They also tend to be more resistant to chemicals and corrosion, making them a good choice for harsh environments. The specific type of fitting used will depend on the application and the requirements of the system.
Here are some additional types of polymer fittings:
Flange fittings: These are fittings that use a flange to connect pipes or tubing together. They are commonly used in industrial and chemical applications.
Reducer fittings: These are fittings that allow for pipes or tubing of different sizes to be connected together. They are commonly used in plumbing and irrigation systems.
Threaded adapters: These are fittings that allow for pipes or tubing with different thread types to be connected together. They are commonly used in plumbing and gas supply systems.
Push in fittings: These are fittings that use a push in mechanism to connect tubing together. They are commonly used in pneumatic and hydraulic systems.
Snap on fittings: These are fittings that use a snap on mechanism to connect tubing together. They are commonly used in irrigation systems.
Polymer fittings come in a variety of shapes, sizes, and materials to meet the needs of different applications. They offer many advantages over metal fittings, including lower cost, easier installation, and resistance to corrosion and chemicals. When selecting a polymer fitting, it is important to consider the specific requirements of the system and choose a fitting that meets those needs.
