There are many types of polymer fittings available, which can be classified based on their shape, material, and application. Here are some of the most common types:
Compression fittings: These are fittings that use compression to join two pipes or tubing together. They are commonly used in plumbing and irrigation systems.
Push to connect fittings: These are fittings that use a simple push mechanism to connect pipes or tubing. They are often used in pneumatic and hydraulic systems.
Barbed fittings: These are fittings that have a barbed end that is inserted into the tubing or hose. They are often used in low pressure applications, such as aquariums and drip irrigation systems.
Quick connect fittings: These are fittings that use a locking mechanism to quickly connect or disconnect pipes or tubing. They are commonly used in fuel and hydraulic systems.
Threaded fittings: These are fittings that have threads that allow them to be screwed onto pipes or fittings. They are commonly used in plumbing and gas supply systems.
Flared fittings: These are fittings that have a flared end that is inserted into the tubing or pipe. They are commonly used in refrigeration and air conditioning systems.
Camlock fittings: These are fittings that have a cam and groove mechanism that allows them to be quickly and easily connected or disconnected. They are commonly used in industrial applications.
Polymer fittings can be made from a variety of materials, including PVC, PEX, nylon, and polypropylene. The choice of material will depend on the application and the specific requirements of the system.
Here are some additional types of polymer fittings:
Insert fittings: These are fittings that are inserted into the end of a hose or tubing and secured with a hose clamp. They are commonly used in irrigation and garden applications.
Elbow fittings: These are fittings that allow pipes or tubing to be connected at an angle. They come in different angles, such as 90 degrees or 45 degrees, and are commonly used in plumbing and gas supply systems.
Tee fittings: These are fittings that allow a pipe or tubing to be split into two or more directions. They are commonly used in plumbing and irrigation systems.
Cross fittings: These are fittings that allow pipes or tubing to be split into four directions. They are commonly used in plumbing and irrigation systems.
Union fittings: These are fittings that allow for easy disassembly and reassembly of pipes or tubing. They are commonly used in applications where pipes or tubing may need to be disconnected for maintenance or repair.
Polymer fittings offer many benefits over traditional metal fittings, including lower cost, lighter weight, and resistance to corrosion and chemicals. They are commonly used in a wide range of applications, including plumbing, irrigation, pneumatics, and hydraulics.
Here are a few more types of polymer fittings:
Cam and Groove fittings: These are fittings that have a cam shaped groove and a locking arm that allows for quick and easy connection and disconnection of hoses. They are commonly used in industries such as agriculture, chemical, and food processing.
Ball valves: These are fittings that use a ball with a hole in the middle to control the flow of fluid through a pipe or tubing. They are commonly used in plumbing and irrigation systems.
Check valves: These are fittings that allow fluid to flow in one direction only, preventing backflow. They are commonly used in pumps, water systems, and irrigation systems.
Clamp fittings: These are fittings that use a clamp to secure two pieces of tubing or pipe together. They are commonly used in the pharmaceutical, biotech, and food processing industries.
Swivel fittings: These are fittings that allow pipes or tubing to rotate or pivot while still maintaining a secure connection. They are commonly used in applications where hoses or pipes need to be able to move without disconnecting.
Polymer fittings are often preferred over metal fittings because they are less expensive, lighter weight, and easier to install. They also tend to be more resistant to chemicals and corrosion, making them a good choice for harsh environments. The specific type of fitting used will depend on the application and the requirements of the system.
Flange fittings: These are fittings that use a flange to connect pipes or tubing together. They are commonly used in industrial and chemical applications.
Reducer fittings: These are fittings that allow for pipes or tubing of different sizes to be connected together. They are commonly used in plumbing and irrigation systems.
Threaded adapters: These are fittings that allow for pipes or tubing with different thread types to be connected together. They are commonly used in plumbing and gas supply systems.
Push in fittings: These are fittings that use a push in mechanism to connect tubing together. They are commonly used in pneumatic and hydraulic systems.
Snap on fittings: These are fittings that use a snap on mechanism to connect tubing together. They are commonly used in irrigation systems.
Polymer fittings come in a variety of shapes, sizes, and materials to meet the needs of different applications. They offer many advantages over metal fittings, including lower cost, easier installation, and resistance to corrosion and chemicals. When selecting a polymer fitting, it is important to consider the specific requirements of the system and choose a fitting that meets those needs.
