There are several types of polymer fittings used in drip irrigation systems, including :
Barbed Fittings : These fittings have a barbed end that is inserted into the drip tubing to create a secure connection.
Compression Fittings : Compression fittings have a threaded end that is screwed onto the drip tubing and a compression nut that is tightened to create a seal.
Push to Connect Fittings : These fittings have a push to connect design that allows for easy and quick installation without the need for tools.
Insert Fittings : Insert fittings have a tapered end that is inserted into the drip tubing and held in place with a hose clamp.
Valve Fittings : Valve fittings are used to control the flow of water in a drip irrigation system and are typically made of PVC or other durable materials.
The choice of fitting will depend on the specific needs of the irrigation system, such as the size and type of tubing used, the water pressure, and the desired flow rate.
Here are a few additional types of polymer fittings commonly used in drip irrigation systems :
Elbow Fittings : Elbow fittings are used to create a 90 degree angle in the drip tubing. They come in different sizes and angles to accommodate the specific needs of the system.
Tee Fittings : Tee fittings are used to split the flow of water into two or more directions. They are commonly used in drip irrigation systems to distribute water to multiple plants or rows.
End Cap Fittings : End cap fittings are used to seal the end of the drip tubing, preventing water from escaping.
Coupling Fittings : Coupling fittings are used to connect two pieces of drip tubing together. They are available in different sizes to accommodate various tubing diameters.
Drip Tape Fittings : Drip tape fittings are specifically designed for use with drip tape, a type of drip tubing that has evenly spaced holes along its length. These fittings have a unique design that allows them to fit securely onto the drip tape without causing damage.
When selecting fittings for a drip irrigation system, it's important to choose ones that are compatible with the type of tubing being used and that can handle the system's flow rate and pressure requirements.
Here are a few more types of polymer fittings used in drip irrigation systems :
Multi Outlet Fittings : Multi outlet fittings are designed to provide water to several plants at once. They have multiple barbs that allow for several pieces of tubing to be connected, enabling water to be distributed to multiple plants from a single fitting.
Goof Plugs : Goof plugs are used to repair holes in drip tubing or to cap off unused sections of tubing. They are easy to install and can help save water by preventing leaks.
Reduced Diameter Fittings : These fittings are used when a smaller diameter tubing needs to be connected to a larger diameter tubing. They have a barb on one end that fits into the smaller diameter tubing and a threaded end that screws into the larger diameter tubing.
Swivel Fittings : Swivel fittings are used when it's necessary to rotate the tubing or fitting after installation. They have a threaded end that can be screwed into the drip tubing or other fittings and a swiveling end that can be adjusted to the desired angle.
Flush Valves : Flush valves are used to clean out drip tubing and prevent clogs. They are typically installed at the end of a line and allow for easy flushing of debris from the system.
There are many types of polymer fittings available for drip irrigation systems, and selecting the right ones will depend on the specific needs of the system. It's important to choose high quality fittings that are durable and designed to handle the flow rate and pressure requirements of the system.
Check Valves : Check valves are used to prevent backflow in drip irrigation systems. They allow water to flow in one direction only, preventing the water from flowing back into the system and potentially contaminating the water source.
Регулатори притиска: Регулатори притиска се користе за регулисање притиска воде у систему за наводњавање кап по кап. Они су важни јер висок притисак воде може проузроковати оштећење цеви и фитинга, а такође може довести до неравномерне дистрибуције воде на биљке.
Прикључци разводника: Прикључци разводника се користе за стварање централне дистрибутивне тачке за систем за наводњавање кап по кап. Они омогућавају повезивање више линија цеви на једну тачку, поједностављујући процес инсталације и обезбеђујући централну локацију за одржавање и поправке.
Прикључци за брзо повезивање: Фитинги за брзо повезивање су дизајнирани да омогуће једноставну и брзу инсталацију и уклањање цеви за капање. Обично имају дизајн за повезивање који омогућава да се цев убаци и закључа на месту без потребе за алатом.
Прикључци са навојем: Навојни фитинзи су дизајнирани да се зашрафљују на крај цеви за капање или друге спојнице. Они пружају сигурну везу и могу се лако уклонити и заменити по потреби.
Укратко, одабир праве полимерне арматуре за систем наводњавања кап по кап је важан за обезбеђивање ефикасног и ефективног заливања биљака. Узимајући у обзир специфичне потребе система, као што су величина цеви, брзина протока и притисак, могуће је одабрати праве фитинге за посао.
