Kako se postavljaju polimerni spojevi?

Polymer fittings, also known as plastic fittings, are commonly used in plumbing, irrigation, and other fluid handling applications. These fittings are made from a variety of polymers such as PVC, CPVC, PEX, and others. Polymer fittings are lightweight, easy to install, and require no special tools or skills. In this article, we will discuss how to install polymer fittings in detail.

Step 1 : Preparation

Before installing polymer fittings, it is important to make sure that the pipes are clean, dry, and free from any debris or contaminants. Any dirt or debris on the pipe surfaces can prevent a proper seal between the fitting and the pipe. To clean the pipes, use a clean rag or cloth to wipe the pipes clean. If necessary, use a pipe cleaner or sandpaper to roughen the surface of the pipe to ensure a better grip on the fitting.

Step 2 : Cut the pipe

Next, cut the pipe to the required length using a pipe cutter or saw. Make sure that the cut is straight and square to ensure a tight and leak free fit. If the pipe is cut at an angle or has rough edges, it can cause the fitting to leak or fail.

Step 3 : Check the fitting

Before installing the fitting, check that it is the correct size and type for the pipe. Polymer fittings are available in a range of sizes and types, including couplings, elbows, tees, reducers, and others. Check that the fitting is the correct type and size for the pipe to be connected.

Step 4 : Insert the pipe

Insert the pipe into the fitting until it stops. Push the pipe in as far as possible to ensure a tight and secure fit. It may be necessary to twist or wiggle the pipe slightly to get it to slide into the fitting. Be careful not to force the pipe too hard, as this can cause it to split or crack.

Step 5 : Tighten the fitting

Once the pipe is inserted into the fitting, tighten the fitting by hand until it is snug. Then, use a wrench to tighten the fitting further, making sure not to overtighten it. Overtightening can cause the fitting to crack or break, leading to leaks or other issues.

Step 6 : Test for leaks

After installing the fitting, turn on the water supply and check for leaks. Check for leaks around the fitting and at any joints or connections in the system. If there are any leaks, tighten the fitting further or replace the fitting if necessary.

Tips for installing polymer fittings :

  1. Make sure to use the correct type and size of fitting for the pipe.

  2. Clean and dry the pipes thoroughly before installing the fitting.

  3. Use a pipe cutter or saw to cut the pipe to the required length.

  4. Insert the pipe fully into the fitting and tighten the fitting securely.

  5. Check for leaks after installation and make any necessary adjustments.

  6. Follow the manufacturer's instructions and guidelines for installation.

  7. Use a Teflon tape on the threads of the fitting to ensure a tight and secure seal.

In conclusion, installing polymer fittings is a relatively easy process that requires a few basic tools and some careful attention to detail. With the right preparation and care, you can install polymer fittings in your plumbing or irrigation system quickly and easily, and enjoy a leak free and reliable system.

 

In addition to the basic steps outlined above, here are some additional tips and considerations to keep in mind when installing polymer fittings :

  1. Use the right type of polymer fitting for the job. There are many different types of polymer fittings available, each designed for specific applications and materials. Make sure you choose the right fitting for the job to ensure a secure and leak free connection.

  2. Use a chamfering tool to prepare the end of the pipe. A chamfering tool is a device that removes burrs and rough edges from the end of the pipe, making it easier to insert into the fitting. This can help ensure a tight and secure connection.

  3. Use the correct insertion depth for the fitting. Each type of fitting has a specific insertion depth that must be followed for the connection to be secure. Check the manufacturer's instructions or consult with a professional plumber to determine the correct insertion depth for your fittings.

  4. Use a ratcheting wrench or torque wrench to tighten the fitting. Overtightening the fitting can cause it to crack or break, while undertightening can lead to leaks. Using a ratcheting or torque wrench can help ensure that the fitting is tightened to the correct level.

  5. Avoid overtightening compression fittings. Compression fittings use a gasket or O ring to create a seal between the pipe and fitting. Overtightening the fitting can compress the gasket or O ring too much, causing it to fail. Follow the manufacturer's instructions carefully when installing compression fittings.

  6. Consider using a thread sealant. For threaded polymer fittings, a thread sealant can help ensure a secure and leak free connection. Use a Teflon tape or liquid thread sealant on the threads of the fitting before installation.

  7. Test the system for leaks before finishing the installation. Before covering or concealing any pipes or fittings, turn on the water supply and check for leaks. This can help catch any issues before they become more serious.

By following these tips and recommendations, you can ensure a successful and reliable installation of your polymer fittings. If you are unsure about any aspect of the installation process, or if you encounter any issues or problems, it is always best to consult with a professional plumber or other qualified expert.