The piping system is a network of pipes that are used to carry various materials such as water, gas, electricity, sewage, etc. in a building or industry. These systems are designed and installed to facilitate the transportation of materials and create the necessary infrastructure for use in buildings and industries.
The piping system generally consists of three main parts:
1 Pipes: Different pipes are used to carry different materials. These pipes can be made of various materials such as PVC, steel, copper, polyethylene, etc.
2 Connections: Various connections are used to connect pipes to each other and to connect them to various devices that are connected to the piping system. These connections can include nuts, valves, couplings, etc.
3 Devices: Various devices such as pumps, transfer boxes, air conditioning systems, heating and air conditioning and other devices are also connected to the piping system.
In general, the piping system is designed and installed in order to facilitate the transportation of materials and create the necessary infrastructure for use in buildings and industries. In order to comply with the principles and standards related to the installation and operation of the piping system, one should refer to architects and civil engineers.
To choose the right piping system, the following points should be considered:
1 type of transported substance: the transported substance can include water, gas, electricity, sewage, etc. Any type of material should be transported with suitable tubes.
2. Pressure: If you need to carry the material under pressure, the pipes should be selected that can withstand high pressure.
3. Heat: If it is necessary to carry a material with high temperature, the pipes must be of a type that can withstand high temperature.
4. Pipe size: When choosing a pipe, you should pay attention to its optimal size. The size of the pipe should be sufficient for the required volume and at the same time have a reasonable cost.
5 Pipe making materials: For each different type of material, different materials are used to make the pipe. It is very important to choose the right materials in accordance with the standards for making pipes.
6 Pipe Slope: To slope the pipe to carry sewage and water, the standard recommendations should be followed to prevent the accumulation of sewage in the pipe.
7 Installation location: The installation location of the pipes should be chosen for easy access and maintenance.
In general, for the proper selection of the piping system, one should pay attention to the important points mentioned above. In general, the installation and operation of the piping system must be done by the relevant experts and in compliance with the relevant principles and standards.
