Push fit pipe fittings are a type of plumbing fitting that can be used with various types of pipes, including copper, PEX, and CPVC pipes. However, the question remains whether they can be used with PVC pipes. In short, the answer is yes, push fit pipe fittings can be used with PVC pipes, but there are some important factors to consider before doing so.
In this article, we will discuss the properties of push fit pipe fittings and PVC pipes, the advantages and disadvantages of using push fit fittings with PVC pipes, the types of push fit fittings that are compatible with PVC pipes, and some best practices for installing push fit fittings on PVC pipes.
Push fit pipe fittings, also known as push to connect or quick connect fittings, are designed to make plumbing installations easier and faster. These fittings are made of brass, copper, or plastic, and they have a rubber or plastic O ring that creates a watertight seal between the fitting and the pipe. Push fit fittings are typically used in applications where soldering or other types of pipe joining methods are not practical or possible.
Push fit fittings work by using a compression mechanism that grips the pipe tightly and creates a secure connection. To install a push fit fitting, the pipe is first cut to the required length and then inserted into the fitting. The fitting is then pushed onto the pipe until it clicks into place, indicating that it is securely connected.
Push fit fittings have several advantages over traditional plumbing fittings. First, they are easy to install and require no special tools or equipment. Second, they can be installed in tight spaces where traditional fittings would be difficult to use. Third, they are reusable, which makes them ideal for temporary installations or repairs. Finally, they are less prone to leaks than traditional fittings because the O ring creates a tight seal around the pipe.
PVC, or polyvinyl chloride, is a type of plastic that is commonly used in plumbing applications. PVC pipes are lightweight, easy to install, and resistant to corrosion and chemical damage. They are also relatively inexpensive compared to other types of pipes, such as copper or stainless steel.
PVC pipes come in different sizes and thicknesses, and they can be used for various applications, including water supply, drainage, and ventilation. They are also used in the construction of swimming pools, irrigation systems, and industrial piping systems.
There are two main types of PVC pipes : schedule 40 and schedule 80. Schedule 40 PVC pipes are the most commonly used type of PVC pipe and are suitable for most plumbing applications. Schedule 80 PVC pipes are thicker and stronger than schedule 40 pipes and are typically used in industrial or high pressure applications.
Using push fit fittings with PVC pipes has several advantages and disadvantages.
Easy to Install : Push fit fittings are easy to install and do not require any special tools or equipment. This makes them ideal for DIY plumbing projects.
Time Saving : Installing push fit fittings is much faster than traditional plumbing methods, such as soldering or using compression fittings.
Reusable : Push fit fittings can be reused, making them ideal for temporary installations or repairs.
No Need for Glue : Unlike traditional PVC fittings, push fit fittings do not require glue to create a seal.
Leak Proof : Push fit fittings create a tight seal around the pipe, which reduces the risk of leaks.
Cost : Push fit fittings are more expensive than traditional plumbing fittings.
Limited Compatibility : Not all push fit fittings are compatible with PVC pipes. This means that you may need to purchase specific fittings that are expensive than general purpose fittings.
Limited Temperature and Pressure Range : Push fit fittings have a limited temperature and pressure range compared to traditional plumbing fittings. This means that they may not be suitable for certain applications.
Limited Availability : Push fit fittings may not be readily available in all hardware stores or plumbing supply stores, which could make it difficult to find the right fittings for your project.
Not all push fit fittings are compatible with PVC pipes. It is essential to choose fittings that are specifically designed for use with PVC pipes. Here are some types of push fit fittings that are compatible with PVC pipes :
SharkBite : SharkBite is a popular brand of push fit fittings that are compatible with PVC pipes. These fittings are made of brass and have a stainless steel grab ring that creates a secure connection with the pipe.
John Guest : John Guest push fit fittings are also compatible with PVC pipes. These fittings are made of plastic and have a locking mechanism that creates a secure connection with the pipe.
Tectite : Tectite push fit fittings are made of brass and are designed for use with various types of pipes, including PVC pipes. These fittings have a stainless steel grab ring that creates a secure connection with the pipe.
Speedfit : Speedfit push fit fittings are made of plastic and are compatible with PVC pipes. These fittings have a locking mechanism that creates a secure connection with the pipe.
When installing push fit fittings on PVC pipes, it is essential to follow some best practices to ensure a secure and leak proof connection. Here are some tips for installing push fit fittings on PVC pipes :
Cut the Pipe to the Correct Length : The pipe should be cut to the correct length before inserting it into the fitting. The end of the pipe should be clean and free of any burrs or rough edges.
Lubricate the Fitting : Apply a small amount of lubricant to the O ring or grab ring of the fitting before inserting the pipe. This will help the fitting slide onto the pipe more easily.
Push the Fitting onto the Pipe : Push the fitting onto the pipe until it clicks into place. Make sure that the pipe is inserted all the way into the fitting.
Test the Connection : After installing the fitting, turn on the water supply and check for leaks. If there are any leaks, turn off the water supply and check the connection again.
Follow the Manufacturer's Instructions : Always follow the manufacturer's instructions when installing push fit fittings on PVC pipes. Each fitting may have specific requirements or recommendations for installation.
In conclusion, push fit fittings can be used with PVC pipes, but it is important to choose fittings that are specifically designed for use with PVC pipes. Push fit fittings have several advantages over traditional plumbing fittings, including ease of installation, time saving, and leak proof performance. However, they also have some disadvantages, including cost, limited compatibility, and limited temperature and pressure range. By following some best practices for installing push fit fittings on PVC pipes, you can ensure a secure and leak proof connection that will last for years to come.